Rio Cinco L4-1.6L DOHC 16V (2003)
6. Remove the strut from suspension tower.
Installation
1. Position the strut, with adjusting plate in place into the strut tower with the raised rubber mounting facing in board.
2. Install the strut mounting block nuts.
Tightening torque: 34 - 46 ft. lbs. (46 - 63 Nm, 4.7 - 6.4 kg-m).
3. Install the steering knuckle in the strut lower bracket and install the two strut lower bracket nuts with attaching nuts.
Tightening torque: 76 - 90.4 ft. lbs. (103 - 123 Nm, 10.5 - 12.5 kg-m).
