Rio Cinco L4-1.6L DOHC 16V (2003)
5. Separate the tie-rod end from the knuckle with the SST.
Notice: If it is difficult to separate, hit the knuckle with a hammer.
6. Remove the caliper assembly from the knuckle. Do not allow the caliper to hang freely by its flexible hose. Suspend the assembly by rope or wire
from the MacPherson strut.
7. Remove the ABS speed sensor and the wheel speed sensor #(RH side).
8. Remove the disc rotor.
9. Remove the clamp bolt and nut. Push the lower arm downward to separate the knuckle and the ballpoint.
