Rio Cinco L4-1.6L DOHC 16V (2003)
^
Do not remove the serration bolt if it is not necessary.
^
Do not reuse the serration bolt if it is removed once.
Inspection
Bearing
Check the following and replace if necessary.
1. Abnormal wear, damage or seizure of bearing.
Notice: Replace the bearing as a set (inner and outer races).
2. Damaged hub cap.
3. Wear or rust of oil seal's contact surface.
4. Crack or damage of rear hub spindle.
Brake drum
1. Wear or damage on the brake drum.
Notice: Remove the minor rust with a sandpaper.
Installation
1. Install new serration bolts by using a press.