Rio Cinco L4-1.6L DOHC 16V (2003)
Check the boots on the driveshaft for cracks, damage, grease leakage or loose boot bands. If any damage is found, replace the boot.
SPLINE LOOSENESS
Turn the driveshaft by hand and check that the spline and joint are not excessively loose. If a damage is found or joint is loose, replace or repair.
TWISTED OR CRACKED
Check that the driveshaft is not twisted or cracked. Replace if necessary.
REMOVAL
1. Jack up the front of the chassis and support it with a safety stands.
2. Drain the transaxle oil.
3. Remove the front wheel and tire assemblies.
4. Raise the nut tab and loosen the driveshaft lock nut, but do not remove it.
