Rondo L4-2.4L (2007)
Power Seat Motor: Testing and Inspection
POWER SEAT MOTOR
INSPECTION
SLIDE MOTOR LIMIT SWITCH
1. Disconnect the limit switch connector (A) and operate the limit switch.
2. Check for continuity between the terminals.
3. Make sure that the seat operation is normal in the reverse after the maximum operation.
4. If there is an abnormality, replace the limit switch.
RECLINING MOTOR LIMIT SWITCH
1. Disconnect the limit switch connector (A) and operate the limit switch.
2. Check for continuity between the terminals.
3. Make sure that the seat operation is normal in the reverse after the maximum operation.