Rondo L4-2.4L (2007)
6. After removing the hog ring clip (A) on the front of seat cushion and remove the seat cushion cover (B).
7. Installation is the reverse of removal.
Recliner Cover Replacement
RECLINER COVER REPLACEMENT
DRIVER'S
1. Remove the clip (D).
2. Remove the recliner lever (C).
3. Using a screw driver, remove the recliner lever cab (A).
4. After loosening the height lever mounting screw, then remove the height lever (B).
5. Remove the front cover (A).
6. After loosening the mounting screws, then remove the recliner cover (B).