Rondo L4-2.4L (2007)
3. Install the rear upper arm (A).
4. Install the pad retainers (D) to the caliper bracket (A).
5. Install the brake pads (B) and pad shims (C) on the pad retainer correctly. Install the pad with the wear indicator on the inside. If you are reusing
the pads, always reinstall the brake pads in their original positions to prevent a momentary loss of braking efficiency.
NOTE
Check the foreign material at the pad shims (A) and the back of the pads (B).
Contaminated brake discs or pads reduce stopping ability. Keep grease off the discs and pads.
