Rondo L4-2.4L (2007)
8. Refill the master cylinder reservoir to the MAX line.
9. Bleed the brake system. (Refer to "Bleeding of brake system")
10. Depress the brake pedal several times to make sure the brakes work, then test-drive.
NOTE
Engagement of the brake may require a greater pedal stroke immediately after the brake pads have been replaced as a set. Several applications of
the brake will restore the normal pedal stroke.
11. After installation, check for leaks at hose and line joints or connections, and retighten if necessary.
Rear
REAR DISC BRAKE
