Rondo L4-2.4L (2007)
Tightening torque
9.8 - 11.76N.m(1.0 1.2kgf.m, 7.23 - 8.67lb-ft)
8. After rotating crankshaft 2 revolutions in regular direction (clockwise viewed from front), confirm the timing mark.
9. Install timing chain cover.
1) The sealant locations on chain cover and on counter parts (cylinder head, cylinder block, and ladder frame) must be free of engine oil and
ETC.
2) Before assembling the timing chain cover, the liquid sealant Loctite 5900 should be applied on the gap between cylinder head and cylinder
block. The part must be assembled within 5 minutes after sealant was applied.
Bead width: 2.5mm(0.1in.)
3) After applying liquid sealant Loctite 5900 on timing chain cover.
The part must be assembled within 5 minutes after sealant was applied.
Sealant should be applied in a single, unbroken bead.
Bead width: 2.5mm(0.1in.)
4) The dowel pins on the cylinder block and holes on the timing chain cover should be used as a reference in order to assemble the timing chain
cover(A) to be in exact position.
