Rondo L4-2.4L (2007)
NOTE
Tighten the bolts in order 1, upper 2, lower 2 and 3.
17. Using flywheel stopper, install crankshaft pulley(B).
Tightening torque
166.6 - 176.4N.m(17 18kgf.m, 122.9 - 130.13lb-ft)
18. Install water pump pulley(A).
Tightening torque
7.84 - 9.8N.m(0.8 1.0kgf.m, 5.78 - 7.23lb-ft)
19. Install drive belt tensioner(B) and tensioner pulley.
NOTE
Tensioner pulley bolt is left-handed screw.
20. Install idler pulley(A)
Tightening torque
53.9 - 63.7N.m(5.5 - 6.5kgf.m, 39.7 - 47.0lb-ft)
21. Install drive belt(A)
Crankshaft pulley -> A/C pulley -> alternator pulley -> idler pulley -> P/C pump pulley -> idler pulley -> water pump pulley -> tensioner pulley.
Rotate auto tensioner arm in the counter - clockwise moving auto tensioner pulley bolt with wrench.