Rondo L4-2.4L (2007)
6. Check the function of all stop lamps before releasing vehicle back to the customer. Address any concern that may interfere with proper brake lamp
operation.
7. Attach campaign completion sticker SC077 to the driver's side inner fender as shown here.
Replacement Procedure 3
Replacement Procedure 3: Sedona (VQ) Stop Lamp Switch 93810 3K400QQK Two Production Ranges: October 6, 2005 to April 30, 2006 and
September 20, 2006 to November 20, 2006
1. Inspection Procedure: Sedona
Open the hood and check for a campaign completion label SC077 on the driver's side inner fender as shown here.
If label exists, NO FURTHER ACTION IS REQUIRED.
If label does not exist, VERIFY SC077 HAS NOT BEEN DONE on WebDCS before continuing to step two (2) of this procedure.
NOTICE
2. Slide the drivers seat all the way rearward.
