Rondo L4-2.4L (2007)
Tire Pressure Sensor: Removal and Replacement
TPMS SENSOR
REMOVAL
TIRE REMOVAL
1. Deflate tire & remove balance weights.
CAUTION:
^
The tire bead should be broken approx. 180° from the valve side of the wheel. The bead breaker should not be set too deep.
^
Avoid tire/tool contact with the valve on dismount.
^
Dismount should end near the valve.
SENSOR REMOVAL
CAUTION: Handle the sensor with care.
1. Remove the valve nut.
CAUTION: The valve nut should not be re-used.
2. Discard the valve assembly.