Rondo L4-2.4L (2007)
Fuel Pressure Regulator: Service and Repair
FUEL PUMP
REMOVAL (INCLUDING FUEL FILTER AND FUEL PRESSURE REGULATOR)
1. Preparation
1. Remove the 3rd seat.
2. Open the service cover (A).
3. Disconnect the fuel pump connector (A).
4. Start the engine and wait until fuel in fuel line is exhausted.
5. After engine stalls, turn the ignition switch to OFF position.
2. Disconnect the fuel feed tube quick-connector (A), the fuel tank pressure sensor connector (B), and the canister close valve connector (C).
3. Remove the rubber cover (D).