Rondo L4-2.4L (2007)
3.
Remove the lower "D-pillar" trim pieces from the left and right sides. Do not disconnect the third (3rd) row seat belt mounting bolts, if equipped.
4.
Remove the upper "D-pillar", trim pieces from both sides. Do not disconnect the second row (2nd) seat belt mounting bolts. Remove the front door
floor scuff trim on both sides.
5.
Remove both lower / upper "B-pillar" trim from the right side. Do not disconnect the passenger seat belt anchor mounting bolts during removal of
trim. Remove only the lower driver's side seat belt anchor bolt to remove the driver's side lower / upper trim. (Tightening torque: 28.9 ~ 39.8 lb.ft
(39.2 ~ 53.9 Nm).
6.
Remove all support handles from the roof. Remove the overhead console and dome lamps.
7.
Remove both "A-pillar" trim pieces and sun visors from both sides.
8.
Remove the four remaining trim tabs with a body trim tool from the interior roof and remove headliner. Do not remove the headliner from the
cabin of the vehicle.
CAUTION
Use care when handling the headliner to avoid damage during disassembly.
9.
Remove the incorrect supplemental restraint system curtain airbag.
