Rondo L4-2.4L (2007)
Wheel Speed Sensor: Recalls
Campaign SC069 - Front Wheel Speed Sensors
Model: Rondo [UN]
Group: Brake System(41)
Number: KT2007051401
Date: Thursday, May 17, 2007
Area: N. America
Subject
Front Wheel Speed Sensor Silicone Varnish
Application Treatment & Replacement (SC069)
- Description
This Service Campaign provides information relating to the replacement or silicone application treatment of existing wheel speed sensors. Rondo
vehicles produced between 7/1/2006 12/31/2006 may exhibit the illumination of the ABS Warning Lamps for front wheel speed sensor diagnostic
trouble codes. The cause of the ABS Warning Lamps illumination may be due to a permeable front wheel speed sensor housing, which can cause
moisture to enter the sensor's internal windings. Kia is treating or replacing existing front wheel speed sensors to correct this condition.
Inspection Procedure:
Open hood and check for SC069 Campaign completion label on the panel above the under hood fuse box. If label exists, NO FURTHER ACTION IS
REQUIRED.
If label does not exist, continue to step 1.
- Vehicles Affected
