Rondo L4-2.4L (2007)
CAUTION
Replacement Procedure 4: Amanti (GH), which requires stop lamp switch 93810 3K400QQK (no cross-wiring extension harness required).
Replacement Procedure 1
Replacement Procedure 1: Sportage (KM) and Rondo (UN) Stop Lamp Switch 93810 3K000QQK Rondo UN Shown as Example in Following
Illustrations
1a. Inspection Procedure - Sportage:
Open the hood and check for a campaign completion label on the driver's side inner fender as shown here.
If label exists, NO FURTHER ACTION IS REQUIRED.
If label does not exist, VERIFY SC077 HAS NOT BEEN DONE on WebDCS before continuing to step two (2) of this procedure.
1b. Inspection Procedure - Rondo:
Open the hood and check for a campaign completion label on the driver's side strut tower as shown here.
If label exists, NO FURTHER ACTION IS REQUIRED.
