Rondo L4-2.4L (2007)
9. Unscrew the connector assembly (A) and then pull the flow control valve (B) and spring out of the pump body.
10. Remove the O-ring from the connector assembly (A).
Inspection
POWER STEERING OIL PUMP
INSPECTION
1. Check that the flow control valve is not bent.
2. Check the shaft for wear and damage.
3. Check the drive belt for wear and deterioration.
4. Check the grooves of the rotor and vanes for stratified abrasion.
5. Check the contact surface of the cam ring and vanes for stratified abrasion.
6. Check vanes for damage.
7. Check that there is no striped wear in the side plate or contacting part between the shaft and the pump cover surface.
Reassembly
POWER STEERING OIL PUMP
REASSEMBLY
1. Assemble a new O-ring to the connector assembly (A).
