Rondo L4-2.4L (2007)
Inspection
FRONT STRUT ASSEMBLY
INSPECTION
1. Check the strut bearing for wear and damage.
2. Check the spring upper and lower seat for damage and deterioration.
3. Compress and extend the piston rod (A) and check that there is no abnormal resistance or unusual sound during operation.
Reassembly
FRONT STRUT ASSEMBLY
REASSEMBLY
1. Install the front shock absorber to SST (0954626000).
2. Install the spring lower pad (C) so that the protrusions (A) fit in the holes (B) in the spring lower seat.
3. Put the coil spring (A) on the spring lower pad (B) correctly as illustration below.