Rondo L4-2.4L (2007)
10. Fix the driveshaft (A) with a vice (B) as illustrated.
11. Apply soap powder on the shaft to prevent being damaged between the shaft spline and the dynamic damper when the dynamic damper is
removed.
12. Separate the dynamic damper (A) from the shaft (B) carefully.
Inspection
FRONT DRIVESHAFT (UTJ-BJ TYPE)
INSPECTION
1. Check the driveshaft spline for wear or damage.
2. Check the spider assembly for roller rotation, wear or corrosion.
3. Check the groove inside the UTJ case for wear or corrosion.
4. Check the dynamic damper for damage or cracks.
Reassembly
FRONT DRIVESHAFT (UTJ-BJ TYPE)