Rondo L4-2.4L (2007)
Wiper Switch: Service and Repair
WINDSHIELD WIPER/WASHER SWITCH
REMOVAL
1. Disconnect the negative (-) battery terminal.
2. Remove the steering column upper and lower shrouds (A) after loosening 3 screws.
3. Remove the wiper switch (A) after disconnecting the connector with pushing the lock pin (B) and loosening 2 screws.
INSTALLATION
1. Install the windshield wiper switch.
2. Connect the wiper switch connector.
3. Install the steering column upper and lower shrouds.
