Rondo L4-2.4L (2007)
Wiper Motor: Service and Repair
Front Wiper Motor
FRONT WIPER MOTOR
REMOVAL
1. Remove the windshield wiper arm and blade after removing a nut (A).
2. Remove the weather strip and the cowl top cover (A) after removing 5 rivets.
3. Remove the windshield wiper motor and linkage assembly after removing 4 bolts. Disconnect the wiper motor connector from the wiper motor &
linkage assembly.
INSTALLATION
1. Install the wiper motor and linkage assembly and then connect the wiper motor connector.
