Rondo V6-2.7L (2009)
1. Remove guide rod bolt (B) and raise the caliper assembly (A).
2. Remove the pads (B), the pad shims (C) and the pad retainers (D) from the caliper bracket (A).
INSTALLATION
1. Install the brake disc (A) and tighten the screw (B).
Tightening torque : N.m (kgf.m, lb-ft)
4.9 - 5.9 (0.5 - 0.6, 3.6 - 4.3)
2. Install the caliper bracket (B) and tighten the caliper mounting bolts (A).
Tightening torque : N.m (kgf.m, lb-ft)
78.5 - 98.1 (8.0 - 10.0, 57.9 - 72.3)
