Rondo V6-2.7L (2009)
8. Install the brake hose bolt (B) and the guide rod bolts (C) to the caliper assembly (A).
Tightening torque : N.m (kgf.m, lb-ft)
Bolt (B) : 24.5 - 29.4 (2.5 - 3.0, 18.1 - 21.7)
Bolt (C) : 21.6 - 31.4 (2.2 - 3.2, 15.9 - 23.1)
9. Refill the master cylinder reservoir to the MAX line.
10. Bleed the brake system.
11. Depress the brake pedal several times to make sure the brakes work, then test-drive.
NOTE:
Engagement of the brake may require a greater pedal stroke immediately after the brake pads have been replaced as a set. Several applications of
the brake will restore the normal pedal stroke.
12. After installation, check for leaks at hose and line joints or connections, and retighten if necessary.
