Rondo V6-2.7L (2009)
EXHAUST MANIFOLD ASSEMBLY
1. Install the exhaust manifold assembly with a new gasket.
Tightening torque
29.4 - 34.3Nm(3.0 - 3.5kgf.m, 21.7 - 25.3lb-ft)
2. Install the heat protector.
Tightening torque
16.7 - 21.6Nm(1.7 - 2.2kgf.m, 12.3 - 15.9lb-ft)
3. Install the front muffler assembly.
Tightening torque
39.2 - 58.8Nm(4.0 - 6.0kgf.m, 28.9 - 43.4lb-ft)
4. Connect the oxygen sensor connector.
5. Install the under cover.
