Rondo V6-2.7L (2009)
painted surfaces. If any coolant spills, rinse it off immediately.
6. Remove the crash pad .
7. Remove the cowl cross bar assembly.
8. Disconnect the connectors from the temperature control actuator, the mode control actuator and the evaporator temperature sensor.
9. Remove the heater & blower unit after loosening 3 mounting bolts.
10. Remove the blower unit (B) from heater unit after loosening 3 screws.
11. Remove the heater core (B) after remove the cover (A).
12. Disconnect the heater lower case (A).
13. Remove the evaporator core(A).
14. Install the heater core in the reverse order of removal.
