Rondo V6-2.7L (2009)
Strut Mount: All Technical Service Bulletins
Campaign SA028 - Front Strut Upper Nut Torque
GROUP Chassis
NUMBER 021
MODEL 2009 MY Rondo (UN)
DATE February 2010
SUBJECT:
SERVICE ACTION: 2009MY RONDO (UN) FRONT STRUT UPPER NUT RETIGHTENING (SA028)
This bulletin provides information relating to some 2009MY Rondo (UN) vehicles built between April 9, 2009 - July 16, 2009. While driving on an
uneven road, some vehicles may experience abnormal noise originating from the upper area of the front strut. Use a torque wrench and the 6" torque
adapter tool to retighten the front strut upper nuts (large, self-locking) on both sides to specified torque specification.
NOTICE
A Service Action is a repair program without customer notification that is performed during the warranty period. Any dealer request to perform this
repair outside the warranty period will require DPSM approval. Repair status for a VIN is provided on WebDCS (Service>Warranty Coverage>
Warranty Coverage Inquiry>Campaign Information). Not Completed Recall/Service Action reports are available on WebDCS (Consumer Affairs>Not
Completed Recall Recall VIN>Select Report).
The issue number is SA028.
Repair Procedure:
1. Open the hood and remove the front strut upper cover as shown in the photo.