Sedona EX V6-3.5L (2002)
7. Turn steering wheel fully to left and right and measure fluid pressure generated by gear housing. If pressure is below specifications, replace gear
housing assembly.
Gear housing fluid pressure: 1,266 - 1,351 psi (8,728 - 9,316 kPa, 89 - 95 kg/cm2)
Notice: If steering wheel is kept in fully fumed position for more than 15 seconds, fluid temperature will rise excessively and damage oil pump.
8. Remove SST (0K210 323 AA0). Replace and tighten high-pressure hose. Tighten to specified torque.
Tightening torque: 39.7 - 47.0 ft. lbs. (54.0 - 63.7 Nm, 5.5 - 6.5 kg-m)
9. Bleed air from system.
