kia Workshop Repair Guides

Kia Workshop Service and Repair Manuals

ABOUT US
Torque Converter Clutch Solenoid, A/T > < Transmission Temperature Sensor/Switch, A/T|Testing and Inspection

Sephia LS L4-1.8L (2001)

  • Transmission and Drivetrain
  • Actuators and Solenoids - Transmission and Drivetrain
  • Actuators and Solenoids - A/T
  • Throttle Valve Solenoid, A/T
  • Component Information
  • Testing and Inspection

Page 1
background image

Throttle Valve Solenoid: Testing and Inspection

RESISTANCE INSPECTION

1. Disconnect negative battery cable.
2. Disconnect solenoid valve connector.

3. Measure resistance between ground terminals and of connector C145.

Resistance: 4.1 - 5.1 ohms 

4. If not correct, check wiring for an open or short circuit, replace pressure control valve.
5. Connect solenoid valve connector.
6. Connect negative battery cable.

  • Transmission and Drivetrain
  • Actuators and Solenoids - Transmission and Drivetrain
  • Actuators and Solenoids - A/T
  • Throttle Valve Solenoid, A/T
  • Component Information
  • Testing and Inspection

Torque Converter Clutch Solenoid, A/T > < Transmission Temperature Sensor/Switch, A/T|Testing and Inspection