Removal and Installation of Shifter A/T for 2001 Sephia LS L4-18L
11. Remove four selector base plate nuts and remove selector lever assembly.
REPLACEMENT
1. Install selector lever and tighten four selector lever base plate nuts.
Tightening torque: 11.5 - 16.6 ft. lbs. (15.7 - 22.6 Nm, 1.6 - 2.3 kg.m)
2. Connect two connectors.
3. Remove shift lock cable and tighten shift lock cable nut.
Tightening torque: 7.2 - 10.8 ft. lbs. (9.8 - 14.7 Nm, 1.0 - 1.5 kg.m)
4. Shift selector lever to P range.
5. Install selector cable.
6. Tighten selector cable nut.
Tightening torque: 69.4 - 95.9 inch lbs. (7.8 - 10.8 Nm, 80 - 110 kg.cm)
