Sephia LS L4-1.8L (2001)
NOTICE: Gasket A and gasket B are not interchangeable. They are identified by their shape in area designated in illustration.
12. Set new gasket A, upper separator plate and new gasket B onto upper control valve body.
13. Secure gasket A, upper separator plate and gasket B to upper control valve body with two screws in locations shown.
14. Set upper control valve body onto main control valve body and install nine bolts.
Tightening torque: 69.6 - 94.8 inch lbs. (7.9 - 10.7 Nm, 80 - 110 kg.cm)
NOTICE: Match bolt head letters as shown.
15. Loosely tighten lower control valve body bolts. (Refer to Bolt installation positions and external parts locations diagram)