Sephia LS Sedan L4-1.8L (1998)
6. Peel off plastic moisture barrier carefully by pulling it away gradually from door frame.
7. Remove window glass.
a. Reconnect window operating switch.
b. Reconnect negative battery cable.
c. Turn ignition on and position window glass about halfway.
d. Turn ignition off.
e. Disconnect negative battery cable.
f.
Remove two glass mounting bolts from power window regulator.
g. Remove glass carefully. Hold glass from both its inner and outer surfaces while tilting it toward hinge side of door, pull it out from outside
door frame.