Sephia LS Sedan L4-1.8L (1998)
5.
Remove two bolts from caliper anchor and remove anchor.
6.
Remove rotor retaining screws (2) and remove rotor.
7.
Install new rotor and reinstall rotor retaining screws.
* NOTICE
Before installing new rotor, make sure mating surfaces on rotor and hub are clean and free of debris.
8.
Reinstall caliper anchor and torque bolts to 33 - 49 lb-ft (45 - 67 Nm).
9.
Clean caliper slide pins and lubricate with high-pressure caliper grease.
* NOTICE
If caliper slide pins are badly rusted or pitted, replace with new.
