Sephia LS Sedan L4-18L (1998) - Front Wheel Alignment | Maintenance and Repair
Fig. 1 Mounting Block Nuts
3. Remove four mounting block nuts.
Fig. 2 Mounting Block Adjustment Positions
4. Push mounting block downward to disengage studs, and turn it to position that corresponds to the difference between the initial reading and the
specification.
5. Install and tighten mounting nuts to specified torque.
Tightening torque: 27 - 38 ft. lbs. (37 - 52 Nm)
6. Lower vehicle and recheck caster/camber. Readjust if necessary.