Sephia LS Sedan L4-1.8L (1998)
2.
Remove rear exhaust system by removing two nuts at rear of main catalytic converter flange and disconnecting rubber mounts (5) from exhaust
system hangers.
3.
Remove 3 bolts holding charcoal canister to body. Leave hoses connected and suspend canister towards the right, using suitable strap or wire.
4.
Support fuel tank using a suitable jack or lifting device.
* NOTICE
If fuel tank is more than 1/4 full, it must be drained to avoid possible spillage from fuel filler pipe and to reduce excessive weight while fuel tank is
being removed and reinstalled.
!WARNING
Fuel vapors are highly flammable. Death or serious injury could result if they are ignited. Make sure there are no open flames or cigarette smoking in
the area of the repair. Adequate ventilation is necessary to prevent a buildup of fumes which could ignite, causing fire or explosion.
