Sephia LS Sedan L4-1.8L (1998)
Loosen and remove two bolts securing the tank straps to the body; lower fuel tank only so far as to allow access to the joint hose connecting the
filler neck to the fuel tank. (Exhaust heat shield may be left attached to the RH tank strap.)
5.
Using compressed air, blow loose dirt, etc. from area around ORVR valve.
6.
Loosen filler neck joint hose clamp on the tank side and disconnect hose.
7.
Lower tank carefully to where the top rear of the tank is just below the rear stabilizer bar.
Free ORVR and rollover vent lines by bending open the metal tabs on tank.
Release hose clamp, and disconnect vent hose from ORVR valve. Position hose over rear stabilizer bar.
