Sephia LS Sedan L4-1.8L (1998)
1. Remove battery.
2. Wait 10 minutes before proceeding.
3. Disconnect appropriate Air Bag Module, and remove from vehicle.
4. Locate air bag in an area that will provide protection to personnel when it deploys. An example of a sate deployment site is a stack of used tires,
6-8 high, with undeployed bag located inside column of tires.
5. Connect air bag deployment tool (K95U-6000-BDY) to air bag module connector and position deployment tool 20 feet away from deployment
site.
6. Connect red lead to positive terminal of battery.
7. Connect black lead to negative battery terminal.
8. Verify that the green POWER indicator on the deployment tool is illuminated.
9. Depress and hold the READY button (button number 1).
10. Verify that the yellow READY indicator is flashing.
