Sephia LS Sedan L4-1.8L (1998)
D. A LIVE (UNDEPLOYED) AIR BAG MAY ACCIDENTLY DEPLOY DURING HANDLING. WHEN CARRYING A LIVE AIR BAG
MODULE, POINT TRIM COVER AWAY FROM YOUR BODY TO LESSEN CHANCE OF INJURY IN CASE OF ACCIDENTAL
DEPLOYMENT. NEVER CARRY MODULE BY ITS WIRING OR CONNECTORS.
E. ALWAYS PLACE LIVE AIR BAG MODULES FACE UP TO LESSEN MOTION OF MODULE IN CASE OF ACCIDENTAL
DEPLOYMENT. KEEP AREA CLEAR OF PARTS, TOOLS AND DEBRIS.
F. NEVER PLACE ITEMS ON OR ABOVE TRIM COVER OF A LIVE AIR BAG MODULE. IN CASE OF ACCIDENTAL DEPLOYMENT,
SUCH ITEMS MAY CAUSE SERIOUS INJURY OR DEATH.
5. Remove module from instrument panel.
6. If necessary, dispose of air bag module. Refer to Air Bag Deployment and Disposal.
INSTALLATION
CAUTION: Take care not to pinch wiring harness with other vehicle parts during reassembly. Kinks in harness will fatigue wires and may lead to
intermittent circuit failure.
1. Couple air bag connector to vehicle wiring harness. Refer to notice in Passenger Air Bag Removal.
2. Install passenger air bag module.
3. Install four mounting bolts.
Tightening torque:
18-32 lb-ft (24-43 N.m, 2.5-4.4 kg-m)
4. Install glove box with two mounting screws.
5. Perform diagnosis. Refer to Trouble Code Diagnostic Procedures.
Deployment and Disposal
WARNING:
A. FAILURE TO FOLLOW ALL WARNINGS, CAUTIONS, NOTES AND PROCEDURES COULD RESULT IN PERSONAL INJURY
OR DEATH.
B. SURFACE OF A DEPLOYED AIR BAG MAY CONTAIN SMALL AMOUNTS OF SODIUM HYDROXIDE(NAOH). PREVENT
CONTACT OF AIR BAG MODULE WITH LIQUIDS, COMBUSTIBLES, AND FLAMMABLE MATERIALS. IMMEDIATELY
WASH HANDS AND EXPOSED SKIN AREAS WITH MILD SOAP AND WATER. FLUSH EYES WITH WATER IF EXPOSED TO
BY PRODUCTS. FAILURE TO FOLLOWING THESE INSTRUCTIONS COULD RESULT IN CHEMICAL BURNS AND
PERSONAL INJURY.
C. A LIVE (UNDEPLOYED) AIR BAG MODULE MAY ACCIDENTLY DEPLOY DURING HANDLING. WHEN CARRYING A LIVE
AIR BAG MODULE, POINT TRIM COVER AWAY FROM YOUR BODY TO LESSEN CHANCE OF INJURY IN CASE OF
