Sephia LS Sedan L4-1.8L (1998)
2.
Loosen air intake hose clamp at throttle body.
3.
Disconnect electrical connectors at MAF and IAT sensors, remove DLC from bracket on air cleaner.
4.
Remove two bolts and one nut securing air cleaner and remove air cleaner.
5.
Inspect the positive battery cable at the three locations shown.
5a.
Location A :
Check for interference or chafing between positive battery cable and sheet metal at rear transaxle mount or air cleaner bracket.
5b.
Location B:
Check for interference or chafing between positive battery cable and transmission dipstick tube. Note whether battery cable is routed in front of or
behind transmission dipstick tube.
Cable should be routed in front of dipstick tube. If not, loosen retainer near transaxle mount and reroute. Photo shows cable routed in front of
