Sephia LS Sedan L4-1.8L (1998)
1. Align the stabilizer bracket bushing with the positioning line on the stabilizer bar.
2. Install stabilizer bracket and tighten mounting.
Tightening torque: 32 - 45 ft. lbs. (43 - 61 Nm)
3. Tighten the control-link bolt on the control-link bracket of the suspension assembly.
Tightening torque: 32 - 45 ft. lbs. (43 - 61 Nm)
4. Tighten the control-link nut on the stabilizer bar.
Tightening torque: 32 - 45 ft. lbs. (43 - 61 Nm)
NOTICE: Tighten control-link bolt and nut to specified torque before lowering vehicle (unload condition).
