Sephia LS Sedan L4-1.8L (1998)
3. Place the mounting block in a vise.
NOTICE: Use protective plates to cover jaws of vise.
4. Loosen retaining nut two to three turns.
NOTICE: Do not remove nut.
5. Compress the coil spring with Special Service Tools (OK2A1 341 001 or equivalent).
6. Remove the retaining nut and washer.
7. Note the position of the mounting block, then remove it. Remove the upper spring seat, upper spring isolator, coil spring, dust boot, rebound
stopper, lower spring isolator and lower spring seat.
Reassembly
1. Secure the shock absorber in a vise.
NOTICE: Use protective plates to cover jaws of vise.
2. Compress the coil spring with Special Service Tools (SST) (OK2A1 341 001 or equivalent).