kia Workshop Repair Guides

Kia Workshop Service and Repair Manuals

Suspension Strut / Shock Absorber|Specifications > < Front Stabilizer and Control Link|Page 5490
Page 1
background image

Suspension Strut / Shock Absorber: Technical Service Bulletins
Suspension - Rear Shock Clunk/Squeak

SOURCE: Kia Technician Times

TITLE: Rear Shock Clunking/Squeaking

APPLIES TO: 98 Sephia

SERVICE TIP:

CONDITION

Some 1998 vehicles have exhibited a "knocking," "clunking" or "squeaking" noise emanating from the rear of the vehicle during cornering.

CAUSE

This condition is caused by the rear strut upper mount coming in contact with the body, typically when cornering.

CORRECTIVE ACTION

1. Remove the rear seat back and parcel shelf.
2. Check that the top of the strut does not contact any of the surrounding sheet metal.
3. If necessary, loosen the two mounting nuts and reposition the strut.
4. Tighten the nuts to 17-22 lb-ft (22-28 Nm) of torque.

Suspension Strut / Shock Absorber|Specifications > < Front Stabilizer and Control Link|Page 5490