Sephia LS Sedan L4-1.8L (1998)
2. If not within specification, replace spring(s).
Re-Assembly
1. Insert 3-4 shift spring, 3-4 shift valve and stop plug. Secure them with stop pin.
2. Insert low reducing spring, low reducing valve and stop plug. Secure them with stop pin.
3. Insert 1-2 shift spring, 1-2 shift valve and stop plug. Secure them with stop pin.
4. Insert pressure regulator valve, pressure regulator spring, pressure regulator spring seat, regulator plug sleeve, pressure regulator plug and stop
plug. Secure them with roll pin.
