Sephia LS Sedan L4-1.8L (1998)
7. Remove window glass:
a. Reconnect window operating switch.
b. Reconnect negative battery cable.
c. Turn ignition on and position window glass about halfway.
d. Turn ignition off
e. Disconnect negative battery cable.
f.
Remove two glass mounting bolts from power window regulator.
g. Remove glass carefully. Hold glass from both its inner and outer surfaces. While tilting it toward hinge side of door, pull it out from outside
door frame.
INSTALLATION
1. Loosen one bolt on glass guide.
2. Install window glass:
a. Position glass carefully. Hold glass from both its inner and outer surfaces. While tilting it toward hinge side of door, place it on small bracket
on power window regulator assembly.