Sephia Sedan L4-1.6L (1996)
1.
Raise the vehicle and remove the front wheel and tire assemblies.
2.
Beginning on one side of the vehicle, carefully remove the spring clip from the front brake caliper.
3.
Remove the caliper slide pin covers then loosen and remove the two (2) brake caliper slide pins using a 7 mm allen wrench/socket.
4.
Slide the brake caliper out of the anchor then remove the brake pads. Use a suitable wire to suspend the brake caliper assembly.
Notice:
Do not allow the brake caliper assembly to hang from the brake hose.
5.
Using a 14 mm socket, remove the two (2) brake caliper anchor mounting bolts from the steering knuckle then remove the anchor.
