Sephia Sedan L4-1.6L (1996)
6.
Install a new brake caliper anchor onto the steering knuckle then reinstall the two (2) anchor bolts and torque the bolts to specification.
Tightening Torque:
33-50 lb-ft. (45-67 N.m)
7.
Install new brake pads into the brake caliper assembly then slide the brake caliper (with new pads) into the brake caliper anchor.
Notice:
Ensure that the inboard brake pad is correctly positioned in the brake caliper piston.
8.
Lubricate the caliper slide pins with high temperature disc brake grease then reinstall the pins and torque to specifications.
Tightening Torque:
18-22 lb-ft (24-30 N.m)
9.
Reinstall the caliper slide pin dust covers then reinstall the spring clip onto the brake caliper assembly.
10.
Repeat steps 2 through 9 above for the other side of the vehicle.
