Sephia Sedan L4-1.6L (1996)
7. Remove the pin lock and extract Pin No. 5 from connector C135.
8. Solder the pin to the wire at the crimp.
CAUTION: Do Not solder the pin opening closed.
9. Re-install Pin No. 5 and pin lock into connector C135 and re-install the connector onto the MAF sensor.
10. Locate junction connectors C252 and C257 (taped up to the harness to the right of the PCM).
NOTICE: Both connectors have BLK/YEL wires.
11. Remove the tape from the connectors.
12. Remove the jumper connector from one of the connectors.