Sephia Sedan L4-1.6L (1996)
Spark Plug: Service and Repair
Removal/Installation
Description
1. Remove and install the spark plug wires carefully.
CAUTION: When the spark plug lead is to be pulled off, pull the boot itself, not the wire.
2. Remove and install the spark plug with a plug socket.
* NOTICE: Be sure the socket is fitted squarely over the spark plug.
3. Apply anti-seize compound or molybdenum-based lubricant to the spark plug threads.
4. Tighten the spark plug to the specified torque.
Spark plug Tightening torque: 11-17 ft-lb (15-23 N.m)
