Sephia Sedan L4-1.6L SOHC 16V (1993)
Front Door Panel: Service and Repair
Notice: There is no stand alone Front Door Panel article authored by the manufacturer. This information was extracted from the Front Door Removal
article.
Front Door Panel Removal and Installation
1. Lower door glass to full down position.
2. Remove the inner handle, the arm rest, the window lift handle, and the door trim panel (arrows).
3. Loosen the door trim mounting screws. Release the clips that hold the door trim, then remove the door trim by pulling it upward. Disconnect the
power window switch connector, power mirror connector, and door courtesy lamp connector (if applicable).
4. Installation is the reverse of removal.
