Sephia Sedan L4-1.6L SOHC 16V (1993)
Fig. 3 Camber & Caster Adjustment
3. Push mounting block downward, Fig. 2, and turn to desired position, Fig. 3, to adjust camber and caster angles.
4. Install and torque mounting nuts to 17-22 ft. lbs.
Toe-In
1. Loosen left and right tie rod locknuts, then turn tie rods equally. The left and right tie rods are both right threaded.
2. To increase toe-in, turn right tie rod toward to front of vehicle and left tie rod equally toward the rear.
3. One turn of tie rod (both sides) changes toe-in by about 0.24 inch.
4. Torque tie rod locknuts to 25-29 ft. lbs.