Sephia Sedan L4-1.8L (1995)
Description
Description
CONTINUITY
1. Disconnect the negative battery cable.
2. Disconnect the HOLD /O/D OFF switch connector.
3. Check for continuity at the HOLD /O/D OFF switch.
4. Replace the selector lever knob if not as specified.
5. Check the wiring harness for continuity if the switch is operating correctly. (HOLD /O/D OFF switch to powertrain control module, HOLD /O/D
OFF switch to body ground)
6. Connect the HOLD/OIL) OFF switch connector.
7. Install the front console and rear console.
8. Connect the negative battery cable.
